G & D Aero Products Inc.
Warning
It is not recommended viewing the sun through the windows as it may be harmful to the eyes.
Do not use any type of heat shields in the rear of AirCraft Pilots shoulder back.
We do not recommend any type of reflective heat shields in your Aircraft
Window Liner Removal
1) To remove window liners you will need a non sharp tool such as a screw driver with the sharp edges ground off the tip bent up making a slight curve.
2) Place the tool under the silicone seal starting at the bottom corner of the window liner working across the bottom prying the seal and the liner towards you. Once the bottom is free talk hold of the seal and liner and pull down and out.
Installation of window liners
1) Be sure windows are clean.
2) Be sure seal is on window liner with a sponge and soapy water go around window frame and then around seal on liner.
3) Insert top of window liner into window frame first, with one hand pushing up from bottom work both sides of window liner in going towards the bottom. Now go across the bottom working the window liner into the window frame.
Emergency window liner removal
1) To remove window liner use a non sharp tool such as a screw driver with the sharp edges ground off and the tip bent up making a light curve.
2) Find the locking seal and place the tool in the lock, unlock the seal around the window liner.
3) Use the tool and in one of the top corners remove the liner from the seal and slide the tool to other corner freeing the liner from the seal across the top.
4) After the top of the liner has been removed from the seal, take hold of the top corners and lift the liner out.
Installation of emergency window liner
1) Be sure windows are clean and the seal is on the window frame properly.
2) Place the window liner into the seal channel first. With one hand push down on the top top of liner and work both sides into the seal channel working toward the top of liner. Now go across the top working the liner into the seal channel.
3) Using your fingers pull the seal onto the liner on top and sides.
4) Using tool or thumb nail go around seal and locking window into seal. Helpful; a rubber lubricant helps seal locking.
